Mehdi Mazar Atabaki
,
Sajjad Jafari
,
Hassan Abdollah-pour
钢铁研究学报(英文版)
Abstract： Wear properties of two different crushers used for grinding raw materials of cement industry are compared using pin-on-disk wear test. The wear test was carried out with different loads on a pin. Abrasive wear behavior of two alloys was evaluated by comparing mass loss, wear resistance, microhardness and friction coefficient. The microstructure of the specimens was detected using optical microscope. The results showed that abrasive wear of high chromium cast iron is lower than that of Hadfield steel. Due to the presence of M7C3 carbides on the high chromium cast iron matrix, impact crushers exhibited higher friction coefficient.
关键词:
Key words: abrasive wear
,
Hadfield steel
,
high chromium
,
cast iron
